At All Detailed Up, we can decontaminate and protect your cars, vans and ever Motorcycles, but why not your bike? Most of the same concepts apply, as your bike still accrues dirt, iron and other microscopic contaminants, so why not give it a comprehensive detail?

Our Bike detail starts by rinsing off any loose dirt, we want to remove as much paintwork contamination as possible without physically touching it, this is how swirls and paint imperfections are embedded into the clear coat.

The drive train, chainring, rear derailleur and cassette are all completely degreased and thoroughly cleaned. The tyres are then scrubbed with a hard brush to loosen dirt from every crevice, with the wheels and spokes cleaned with a medium to soft bristle brush.

The pedals receive a thorough agitation with a hard brush to remove any tough dirt and grime, with the whole frame, handle bars and seats cleaned with a ph neutral shampoo with soft brushes.

Once contamination free, the whole bike is warm air blow dried, to eliminate water spotting and potential scratch marks. The chain and derailleur are re-lubricated and the disc/rim brakes are cleaned with IPA.

The entire bike surface is also wiped down with IPA to remove any remaining polish, wax, oils or other contaminants. If a suspension is present, the shafts are wiped down with IPA.

To finalise the detail, a Wax Is Dead Bike Ceramic Coating is applied to the frame, and left to fully cure.